We sell whitewood glued beams, length 12m for roofs

   We have over stuck logs and sawn lumbers and are looking for international market.we can supply for years.Our company export African woods, Plantation wood , Padouk - red Tali -Okan -Bilinga -Dabema -Azobe
-Niovi -Maobi -Doussie -Bibolo -Zingana and many more types;
Timber Rounds Logs
-Padouk - red Tali -Okan
-Bilinga -Dabema -Azobe
-Niovi -Maobi -Doussie
-Bibolo -Zingana

Specification
No hole,No dacay,no sapwood,straight logs,no wane.

Dimension
60cm and up and the length is 6m-11.5m for all the
SAWN LUMBERS

-Bubinga , -Iroko , -Padouck

-Sapelli , -Wenge , -Doussie

Our company specialized export timber woods: log type and sawn type
with good quality and competitive price.We also have logs of many different kinds.
Square logs, cants, planks, wooden strips for flooring, decking,
unfinished and prefinished flooring, doors and pergolas.
Products originated from west
Africa like Ghana, Kenya and Cameroon. We also have woods from
Ecuador.
Features:
* Product USP: Termite proof, rust proof
* Lead time: Order specific
* Quantity:On buyers request.
Loading port:Douala international seaport.
* Sampling:Free/ delivery costs

*Inspection:By SGS or others
*measurement method:Hogpus method.
Log type, features;
Girth in cms. length
46 to 60 ....... 2 to 3 meters.....
61 to 75 ....... 2 to 3 meters.....
76 to 90 ....... 2 to 3 meters.....
90 and up ...... 2 to 3 meters.....
90 and up....... 4 to 5 meters.....
76 to 90 ....... 4 to 5 meters.....

Sawn type.
-Species, 2 sides and 4 sides sawn timber.
-Standard size
-thickness, 10 - 50 mm.
-width, 2 -20 cm.
-length, about 2m.
We can provide products with dimensions as required by customers, if
you are interested please send us your (LOI ) letter of intern including your letter head and the requested size , we will end the best quotation.Thanks and waiting to read from you.

   SAUNA,
We are pleased to introduce our new Sauna Barrel from Siberian spruce or larch with stainless steel heater. Our Sauna Barrel is for 4-8 persons, and delivered fully assembled with legs for stabilisation.
HOT TUB
The most popular are the tubs with the inner diameter of 190-220 cm, depth - 95 cm and floor and side walls - 4 cm in thickness. The open air bath of such size suits best for a group of 4-8 persons, a family or a small company of friends. A set of such open air bath consists of a tub from the spruce (constriction rings and other metal parts are of stainless steel, the top of the side walls are with armrests and supports), a stainless steel heater with a chimney and a roof, five benches and a protective fence.

   We sell whitewood glued beams, length 12m for roofs

   BRIEFLY PRODUCTION PROCESS DESCRIPTION

The working cycle starts with delivery of wet sawdust by a loader on board feeder with scraper and smooth speed regulation of the shift. From the board feeder sawdust goes to the separator of thicker cuts, where it is filtered from the larger wooden parts, boards and stones. Filtered sawdust goes to the wet source warehouse.



Wet sawdust goes from silos to dryer board conveyor which automatically measures it in faster or shorter way depending on water content of the sawdust (it is fully automatic system with microprocessor controller). At this moment it is dried from 55-60% humidity to 12-14%. Dry source goes to the expansion container where dry sawdust is divided from water vapour and drying agent. Dry material is picked up from dryer`s expansion container by spiral conveyor outside, where the water content is measured, which is used to the automatic dryers controller. Drying agent and water vapour goes through the cyclone where is cleaned from volatile substances and goes to the atmosphere. Separated dust in cyclone goes through the lock/sluice/floodgate back to the production process.



Dry sawdust goes through the pneumatic separator and magnetic separator, (where small dirtiness is divided like stones, metal) and goes to the grinder (hammer mill). In this place everything is shredded to the right and homogeneous cut. When sawdust is properly fragmented than it goes with the help of pneumatic transport to the silos (dry sawdust warehouse).



Shredded sawdust goes from the silos to the briquette`s buffer container, where from the spiral conveyor doses stable and regular to the briquetting machine, where happens the proper clumping sawdust to briquette.

When briquette goes out from the briquetting machine it is send to picking up machine – length from 6m up to 12m) – depending on what type of briquette is produced (industrial, for fireplaces).

Next on briquette is cooled and hardened and after that goes to the pounder where automatically falls to the bags or it goes to the cutter where it is cut to the same length pieces (10 – 30 cm). When it is done than a worker puts them on the packing machine feeder where is packed to 5 – 15 kg packets.



Fuel delivery system to the dryer`s heather.

Dryer`s heather is fired with wooden waste (wet it is perfect).

Outside the production hall under roof or in any other room is chopper, where wooden waste is shredded and next is delivered to the fuel magazine (silos, 24h safety deposit of fuel for the dryer). The chips are taken from silos via spiral conveyor and are delivered to the loading feeder of the heather (sztoker) equipped with a fuel level sensor which controls the spiral conveyor. Feeding the resource to the heather is automatic and is controlled via microprocessor controller, which also controls heather`s temperature, turns it on and off the heather (sztoker) and heather`s blow ventilator.

   BRIEFLY DESCRIPTION OF PRODUCTION PROCESS.

The working cycle starts with delivery of wet sawdust by a loader on board feeder with scraper and smooth speed regulation of the shift. From the board feeder sawdust goes to the separator of thicker cuts, where it is filtered from the larger wooden parts, boards and stones. Filtered sawdust goes to the wet source warehouse of with hydraulic unload system.

Wet sawdust goes from silos to dryer board conveyor which automatically measures it in faster or shorter way depending on water content of the sawdust (it is fully automatic system with microprocessor controller). At this moment it is dried from 55-60% humidity to 8-10%. Dry source goes to the expansion container where dry sawdust is divided from water vapour and drying agent. Dry material is picked up from dryer`s expansion container by spiral conveyor outside, where the water content is measured, which is used to the automatic dryers controller. Drying agent and water vapour goes through the cyclone where is cleaned from volatile substances and goes to the atmosphere. Separated dust in cyclone goes through the lock/sluice/floodgate back to the production process.

Dry sawdust goes through the pneumatic separator and magnetic separator, (where small dirtiness is divided like stones, metal) and goes to the grinder (hammer mill). In this place everything is shredded to the right and homogeneous cut. When sawdust is properly fragmented than it goes with the help of pneumatic transport to the silos (dry sawdust warehouse).

Shredded sawdust goes from the silos to the final system prepared for granulating. If the quality of source need to add second component and humidity is stabilized to 11-12%.

At this moment, so well prepared material is added to the pellet mill`s buffer container, where with the help of spiral conveyor assures a stable and regular dosing of the resource connected with automatic work of the pellet mill`s delivers sawdust to the mixer/conditioner.

In mixer/conditioner 180°C vapour water is added to the material, which increases gluing efficiency of the pellets, stable work of pellet mill and less use of die and rollers.

The resource goes back from mixer/conditioner to the pellet mill where sawdust is ironed to pellets. Hot pellets are transported to the antiradiation cooler where is cooled and hardened. Cold product goes to the sieve, where dust and volatile substances is separated. Filtered pellets go to the ready product container and dust with volatile substances via inhalation process goes back to the production process through grinder (hammer mill).

To the ready product chamber is connected automatic line responsible for packing pellets in bags from 10kg up to 50kg. That chamber is also equipped in docking station with electronic scale ready to pack big-bags.

Fuel delivery system to the dryer`s heather.

Dryer`s heather is fired with wooden waste (wet it is perfect).

Outside the production hall under roof or in any other room is chopper, where wooden waste is shredded and next is delivered to the fuel magazine (silos, 24h safety deposit of fuel for the dryer). The chips are taken from silos via spiral conveyor and are delivered to the loading feeder of the heather (sztoker) equipped with a fuel level sensor which controls the spiral conveyor. Feeding the resource to the heather is automatic and is controlled via microprocessor controller, which also controls heather`s temperature turns it on and off the heather (sztoker) and heather`s blow ventilator.

The whole line works in automatic mode with visualisation of all devices. All containers have got filling level sensors.

Full control of all engines is synchronised in that way, that if one of the engines stopped all others are shutting down too in a specific order so nothing would be blocked or buried.

   We sell whitewood glued beams, length 12m for roofs

   We produce red fir timber for constructions: roofs, fences, joinery, etc

   Dynea film, dynea glue, poplar, birch, hardwood core
Size: 1220x2440 1250x2500 1500x3000 1525x3500
Thickness: 6mm-40mm.

Dynea brown PSF 120/120 m2
Birch or poplar hardwood core no stacked joints
Core plys to be uniform thickness
Dynea WBP glue to pass 72 hour boil test
Finished product to be smooth with no burn marks or rough marks on either face.
Edges smooth with no film overlap, if putty used on edges it must be waterproof and sanded smooth.
All edges sealed with qualtiy sealer silver or brown in color. No over spray on faces! !
Tolerance: Thickness +/- 0.5mm width/length +/- 1.5mm

   Film Faced Plywood

1) Face and back: : 240GSM Black Film, 120GSM Brown Film, film with logo, anti-slip film
2) Core: Combi, popular, birch, etc.
3) Glue: WBP, MR, dynea WBP
4) Edge: Sealed by water proof paint, paint colour as requsted.
5) Dimensions: 1220 x 2440mm/1250 x 2500mm, 1500x3000mm, or as requsted.
6) Thickness: 9/12/15/18/20/21/25/27mm

Features:
1) Waterproof, can smooth the surface of concrete, and extend the working life of the concrete
2) Wear-resistant, anti-cracking, anti-acid and alkaline-resistant
3) No color contamination between the concrete and the shuttering board
4) Low aldehyde, phenol, and other toxic emissions
5) Can be cut into small size for re-using

   WE HAVE AVAILABLE 24 M3 OF BEAMS AND BOARDS FOR PLAY-PARK OR KINDER GARDEN IN ACACIA,SANDED,PLANED,CHAMFERED AND CLEANED OF ANY CHIPPING DANGEROUS DEFECT.WOOD IS ACACIA ON WHITE COLOUR DEBARKED AND CLEAN OF SAPWOODS.LENGTH FRM 1.600 UP 3.500 ONE SIDE AS PER WOOD`S NATURAL CURVATURE SANDED AND CHAMFERED.PLANKS FOR ROOFING SAME KIND ALL SANDED AND CHAMFERED.ALL PACKED ON PALLETS AND BOUNDLE BY METAL STRIP
PACKING LIST AND PHOTOS DETAILED ON REQUEST

   Blade series: blades for various industries such as print, wood-working, light, paper, metallurgy, forestry, and plastic, rubber and food processing, etc. Made of the heatproof alloy steel such as H13、HMB、LD、65Nb、SKH、5CrW2Si、Cr12MoV,SKD-11.etc.

   We produce wooden houses of various sizes and models wearing termite-proof wood and iron wood.

wooden-houses production with a system of earthquake-resistant construction and wind resistant construction standard syclon Australia (Darwin).

We serve the order on the picture wooden house log house that you have prepared and we have designed an image or a wooden house on your idea by not leaving the system construction of wooden houses apart pairs that we apply so that the assembly in export destination countries can be installed easily and in complete with a picture of how the assembly.

We serve the order sets a wooden house with a house full of structures, walls, floors, roof, ceilings, stairs, deck, doors, windows, main beams, fence made of wood unless other material components such as glass, door handle / window, ceiling when not needed, roofing, nails, or materials other than wood can be purchased at the export destination country wooden house.

   The working cycle starts with delivery of wet sawdust by a loader on board feeder with scraper and smooth speed regulation of the shift. From the board feeder sawdust goes to the separator of thicker cuts, where it is filtered from the larger wooden parts, boards and stones. Filtered sawdust goes to the wet source warehouse of with hydraulic unload system.

Wet sawdust goes from silos to dryer board conveyor which automatically measures it in faster or shorter way depending on water content of the sawdust (it is fully automatic system with microprocessor controller). At this moment it is dried from 55-60% humidity to 8-10%. Dry source goes to the expansion container where dry sawdust is divided from water vapour and drying agent. Dry material is picked up from dryer`s expansion container by spiral conveyor outside, where the water content is measured, which is used to the automatic dryers controller. Drying agent and water vapour goes through the cyclone where is cleaned from volatile substances and goes to the atmosphere. Separated dust in cyclone goes through the lock/sluice/floodgate back to the production process.

Dry sawdust goes through the pneumatic separator and magnetic separator, (where small dirtiness is divided like stones, metal) and goes to the grinder (hammer mill). In this place everything is shredded to the right and homogeneous cut. When sawdust is properly fragmented than it goes with the help of pneumatic transport to the silos (dry sawdust warehouse).

Shredded sawdust goes from the silos to the final system prepared for granulating. If the quality of source need to add second component and humidity is stabilized to 11-12%.

At this moment, so well prepared material is added to the pellet mill`s buffer container, where with the help of spiral conveyor assures a stable and regular dosing of the resource connected with automatic work of the pellet mill`s delivers sawdust to the mixer/conditioner.

In mixer/conditioner 180°C vapour water is added to the material, which increases gluing efficiency of the pellets, stable work of pellet mill and less use of die and rollers.

The resource goes back from mixer/conditioner to the pellet mill where sawdust is ironed to pellets. Hot pellets are transported to the antiradiation cooler where is cooled and hardened. Cold product goes to the sieve, where dust and volatile substances is separated. Filtered pellets go to the ready product container and dust with volatile substances via inhalation process goes back to the production process through grinder (hammer mill).

To the ready product chamber is connected automatic line responsible for packing pellets in bags from 10kg up to 50kg. That chamber is also equipped in docking station with electronic scale ready to pack big-bags.

Fuel delivery system to the dryer`s heather.

Dryer`s heather is fired with wooden waste (wet it is perfect).

Outside the production hall under roof or in any other room is chopper, where wooden waste is shredded and next is delivered to the fuel magazine (silos, 24h safety deposit of fuel for the dryer). The chips are taken from silos via spiral conveyor and are delivered to the loading feeder of the heather (sztoker) equipped with a fuel level sensor which controls the spiral conveyor. Feeding the resource to the heather is automatic and is controlled via microprocessor controller, which also controls heather`s temperature turns it on and off the heather (sztoker) and heather`s blow ventilator.

The whole line works in automatic mode with visualisation of all devices. All containers have got filling level sensors.

Full control of all engines is synchronised in that way, that if one of the engines stopped all others are shutting down too in a specific order so nothing would be blocked or buried.

   Dear Sirs!

We are one of the leading manufacturers of large-format Birch Boiling Waterproof (WBP glue) plywood in the Russian market. Our annual production capacity amounts to 60 thousand cubic meters of plywood.

Our Prices FOB St-Petersburg:
4x8 CP/C, exterior glue, CARB 12mm - 464 EURO
4x8 CP/CP, exterior glue, CARB 9mm - 452 EURO

Please do not hesitate to contact me on if I can be of any assistance.