Dear Mr./Mrs.

We appreciate your interest in our products. We are Lithuanian company specialize in manufacture and sale of firewood.

We export our products to different countries in Europe. We have our regular clients in Germany, Netherlands, Belgium, Norway, Sweden, France and Ireland. At the moment we have free capacities for ~700m3 (~15 trucks) of dry firewood per month. Therefore we are looking for new clients who would be interested to get us as suppliers for long-term basis.

We are also ready to offer full logistic service for the clients all over the world. Our experience gives us possibility to supply clients `TO DOOR` service.

Our firewood are high quality, produced from certified woods only. The professional equipment allows us to reach high quality of our production. Split firewood are exposed to drying in automatic drying chambers up to necessary quality. Only after drying firewood are packed into bags or in palettes. It allows us to reach the best quality and packaging of our production

Buy know - Pay less

Before come New heating season!

   Dear Sirs/Madams,

We are Ukrainian company producer of firewood and kindling for firing. We offer on regular basis 100 pallets of firewood and 30 pallets of kindling for firing per week.

Dry firewood:
oak, hornbeam, natural birch and drying chamber:
length - 31-33 cm (other sizes on request);
moisture - 20% -25%;
fraction - from 5 to 18 cm.
Packed of own production crate on a pallet, size:
length - 1 m, width - 1 m height - 2 m.

Moist firewood: oak, hornbeam, birch:
length - 31-33 cm (other sizes on request);
moisture - 35% and more;
fraction - from 5 to 18 cm.
Packed of own production crate on a pallet, size:
length - 1 m, width - 1 m height - 2 m.

Kindling for firing from coniferous breeds of a tree:
length - 20-25cm;
moisture - 14%;
fraction- from 2 to 4 cm;
packaging - 1.5-6 kg in the grid (on the client request).

Our production unit is situated in Zhitomir Region and Office is situated in Kiev.

Please quote your purchasing prices DDU Germany (indicate your point of destination).

Best Regards!

   We are the manufacturer of the pieces of beech wood in different sizes, regular geometric shape, freshly cut and dried in a drying chamber. Production capacity of 200-250 cubic meters per month.

   Dear Sirs,

We appreciate your interest in our products and would like to inform our recent and potencial clients that we have build two new generation drying chambers for hardwood, which will allow us to reach the higher quality of our dryied firewood as the drying process takes 3-4 days to reach the hardwood moisture less 22%. Furthemore such speedy drying process prevents firewood from any mould and you will not be needed to aware to store your firewood in the unaired warehouse for a longer period.
Please, contact us urgently if you will be interesting in order our firewood in the short run.

We look forward to hear from you & our best respects for YOU!

   BRIEFLY DESCRIPTION OF PRODUCTION PROCESS.

The working cycle starts with delivery of wet sawdust by a loader on board feeder with scraper and smooth speed regulation of the shift. From the board feeder sawdust goes to the separator of thicker cuts, where it is filtered from the larger wooden parts, boards and stones. Filtered sawdust goes to the wet source warehouse of with hydraulic unload system.

Wet sawdust goes from silos to dryer board conveyor which automatically measures it in faster or shorter way depending on water content of the sawdust (it is fully automatic system with microprocessor controller). At this moment it is dried from 55-60% humidity to 8-10%. Dry source goes to the expansion container where dry sawdust is divided from water vapour and drying agent. Dry material is picked up from dryer`s expansion container by spiral conveyor outside, where the water content is measured, which is used to the automatic dryers controller. Drying agent and water vapour goes through the cyclone where is cleaned from volatile substances and goes to the atmosphere. Separated dust in cyclone goes through the lock/sluice/floodgate back to the production process.

Dry sawdust goes through the pneumatic separator and magnetic separator, (where small dirtiness is divided like stones, metal) and goes to the grinder (hammer mill). In this place everything is shredded to the right and homogeneous cut. When sawdust is properly fragmented than it goes with the help of pneumatic transport to the silos (dry sawdust warehouse).

Shredded sawdust goes from the silos to the final system prepared for granulating. If the quality of source need to add second component and humidity is stabilized to 11-12%.

At this moment, so well prepared material is added to the pellet mill`s buffer container, where with the help of spiral conveyor assures a stable and regular dosing of the resource connected with automatic work of the pellet mill`s delivers sawdust to the mixer/conditioner.

In mixer/conditioner 180°C vapour water is added to the material, which increases gluing efficiency of the pellets, stable work of pellet mill and less use of die and rollers.

The resource goes back from mixer/conditioner to the pellet mill where sawdust is ironed to pellets. Hot pellets are transported to the antiradiation cooler where is cooled and hardened. Cold product goes to the sieve, where dust and volatile substances is separated. Filtered pellets go to the ready product container and dust with volatile substances via inhalation process goes back to the production process through grinder (hammer mill).

To the ready product chamber is connected automatic line responsible for packing pellets in bags from 10kg up to 50kg. That chamber is also equipped in docking station with electronic scale ready to pack big-bags.

Fuel delivery system to the dryer`s heather.

Dryer`s heather is fired with wooden waste (wet it is perfect).

Outside the production hall under roof or in any other room is chopper, where wooden waste is shredded and next is delivered to the fuel magazine (silos, 24h safety deposit of fuel for the dryer). The chips are taken from silos via spiral conveyor and are delivered to the loading feeder of the heather (sztoker) equipped with a fuel level sensor which controls the spiral conveyor. Feeding the resource to the heather is automatic and is controlled via microprocessor controller, which also controls heather`s temperature turns it on and off the heather (sztoker) and heather`s blow ventilator.

The whole line works in automatic mode with visualisation of all devices. All containers have got filling level sensors.

Full control of all engines is synchronised in that way, that if one of the engines stopped all others are shutting down too in a specific order so nothing would be blocked or buried.

   Dear Sirs,

We appreciate your interest in our products and would like to inform our recent and potencial clients that we have build two new generation drying chambers for hardwood, which will allow us to reach the higher quality of our dryied firewood as the drying process takes 3-4 days to reach the hardwood moisture less 22%. Furthemore such speedy drying process prevents firewood from any mould and you will not be needed to aware to store your firewood in the unaired warehouse for a longer period.

   The working cycle starts with delivery of wet sawdust by a loader on board feeder with scraper and smooth speed regulation of the shift. From the board feeder sawdust goes to the separator of thicker cuts, where it is filtered from the larger wooden parts, boards and stones. Filtered sawdust goes to the wet source warehouse of with hydraulic unload system.

Wet sawdust goes from silos to dryer board conveyor which automatically measures it in faster or shorter way depending on water content of the sawdust (it is fully automatic system with microprocessor controller). At this moment it is dried from 55-60% humidity to 8-10%. Dry source goes to the expansion container where dry sawdust is divided from water vapour and drying agent. Dry material is picked up from dryer`s expansion container by spiral conveyor outside, where the water content is measured, which is used to the automatic dryers controller. Drying agent and water vapour goes through the cyclone where is cleaned from volatile substances and goes to the atmosphere. Separated dust in cyclone goes through the lock/sluice/floodgate back to the production process.

Dry sawdust goes through the pneumatic separator and magnetic separator, (where small dirtiness is divided like stones, metal) and goes to the grinder (hammer mill). In this place everything is shredded to the right and homogeneous cut. When sawdust is properly fragmented than it goes with the help of pneumatic transport to the silos (dry sawdust warehouse).

Shredded sawdust goes from the silos to the final system prepared for granulating. If the quality of source need to add second component and humidity is stabilized to 11-12%.

At this moment, so well prepared material is added to the pellet mill`s buffer container, where with the help of spiral conveyor assures a stable and regular dosing of the resource connected with automatic work of the pellet mill`s delivers sawdust to the mixer/conditioner.

In mixer/conditioner 180°C vapour water is added to the material, which increases gluing efficiency of the pellets, stable work of pellet mill and less use of die and rollers.

The resource goes back from mixer/conditioner to the pellet mill where sawdust is ironed to pellets. Hot pellets are transported to the antiradiation cooler where is cooled and hardened. Cold product goes to the sieve, where dust and volatile substances is separated. Filtered pellets go to the ready product container and dust with volatile substances via inhalation process goes back to the production process through grinder (hammer mill).

To the ready product chamber is connected automatic line responsible for packing pellets in bags from 10kg up to 50kg. That chamber is also equipped in docking station with electronic scale ready to pack big-bags.

Fuel delivery system to the dryer`s heather.

Dryer`s heather is fired with wooden waste (wet it is perfect).

Outside the production hall under roof or in any other room is chopper, where wooden waste is shredded and next is delivered to the fuel magazine (silos, 24h safety deposit of fuel for the dryer). The chips are taken from silos via spiral conveyor and are delivered to the loading feeder of the heather (sztoker) equipped with a fuel level sensor which controls the spiral conveyor. Feeding the resource to the heather is automatic and is controlled via microprocessor controller, which also controls heather`s temperature turns it on and off the heather (sztoker) and heather`s blow ventilator.

The whole line works in automatic mode with visualisation of all devices. All containers have got filling level sensors.

Full control of all engines is synchronised in that way, that if one of the engines stopped all others are shutting down too in a specific order so nothing would be blocked or buried.

   After opening firewood manufacture in Latvia, we are producing and selling fresh cut and dry (in drying chamber) firewood mostly packed in 22l net bags and in 2m3 crates. All kind of species of firewood-softwood (alder, aspen, birch) and hardwood (oak/ash).

   Dear Sirs,
Great opportunity for investment. Due to retirement owners sell fully loaded furniture factory in Serbia. Factory is 6 years old, specialized for chairs, tables and beds mainly for export to EU and Russia. Build on over 30.000 m2 area, with buildings over 8.000 m2, plus drying chambers.Very flexible owner for price negotiations. EU company own 100% of the shares and there is no tax on purchasing or any hidden expenses. Many extra benefit from Serbian government. For more details and photos please contact me.
Best Regards

   WE ARE LEADING COMPANY IN WOOD PROCESSING IN UKRAINE,ALL SAWMILLS ARE EUROPEAN CERTIFIED,OUR 1200 M3 OF DRYING CHAMBERS ARE SUPERVISED BY HIGHLY TRAINED EXPERTS ALL ALONG MONITERED BY ITALIAN TECHNOLOGY COMPUTERS (PANTO),WE ARE SPECIALISED IN EUROPEAN WHITE OAK,MAPPLE AND ASH KD AND FRESH CUT.WE EXPORT TO SEVERAL EUROPEAN COUNTRIES AS WELL AS MIDDLE EAST.

   Dear Sirs,

We appreciate your interest in our products and would like to inform our recent and potencial clients that we have build two new generation drying chambers for hardwood, which will allow us to reach the higher quality of our dryied firewood as the drying process takes 3-4 days to reach the hardwood moisture less 20%. Furthemore such speedy drying process prevents firewood from any mould and you will not be needed to aware to store your firewood in the unaired warehouse for a longer period.

From the April we are making calculation for our production capacities. When you will find time, please, give us your reliable forecast per March-May month, some specifications of your need as well (dry or fresh wood, log length, wood type, packing type).

Please, contact us urgently if you will be interesting in order our firewood in the short run.

We look forward to hear from you & our best respects for YOU!

   We are selling 5 years old solid wood furniture factory in Serbia. factory is completely equipped with computerized drying chambers. Factory was exporting chairs, tables and beds to EU ( Italy, Germany, Denmark, UK...) have supplier registration number with Ikea...Factory is clear on any debts to the government, workers or banks. Please contact me for more specific details and photos.
Alex Petrovic-Comercial director

   Dear Mr(Ms)

Please send me an offer price, and the dimensions for drying chamber of : 25 m3, 20 `and 40`

I am waiting for quick response.

Regards

   Dear Mr./Mrs.

We appreciate your interest in our products. We are Lithuanian company specialize in manufacture and sale of firewood.
We export our products to different countries in Europe. We have our regular clients in Germany, Netherlands, Belgium and Ireland. At the moment we have free capacities for ~700m3 (~15 trucks) of dry firewood per month. Therefore we are looking for new clients who would be interested to get us as suppliers for long-term basis.

We are also ready to offer full logistic service for the clients all over the world. Our experience gives us possibility to supply clients `TO DOOR` service.

Our firewood are high quality, produced from certified woods only. The professional equipment allows us to reach high quality of our production. Split firewood are exposed to drying in automatic drying chambers up to necessary quality. Only after drying firewood are packed into bags or in palettes. It allows us to reach the best quality and packaging of our production

   We have for sale Kind Dryer chamber for timber, capacity 50-80 m3